HFS(R) Annular Cutter with 3" Pilot Pin High Speed Steel for Magnetic Drill Press 5/8-Inch Diameter x 1-Inch Depth of Cut

1.The cutting speed=20-25m/min 2.The reasonable rotate feed amount shall be fn=0.08-0.13mm/r. The reasonable feed rate shall be vf=36-60mm/min. "Weldon shank" annular cutters have 2 flats and fix in the chuck by tightening grub screws in the two flat areas. 3. Insert the ejector pin inside the annular cutter. Fill the coolant tank with oil lubrication, never use the machine without lubricant

• [Size]: This annular cutter measures 5/8" in diameter with a 1" depth of cut, providing precise and efficient cutting performance.
• [Material]: Made from M2AL high-speed steel, it offers longer service life and excellent heat resistance, ensuring durability and reliability.
• [Packing]: Comes with a 3/4" Weldon shank with 2 flats, fitting most standard magnetic drill presses, and includes one 3" pilot pin for added convenience.
• [Scope of Application]: Compatible with almost all major brands of magnetic drills and can also be used with machine tools such as mills and large drill presses with tool holders.
• [Applicable Materials]: Suitable for cutting a variety of materials, including wood, steel plates, aluminum, brass, cast iron, and lower BHN stainless steel.